Forever Young Anti-Aging Treatment

Author Image

By: TOM BRANNA

Editor

Forever Young Anti-Aging Treatment
Ingredients
%

Phase A

  • Deionized water
  • 62.55
  • Dissolvine GL-47-S (Coast Southwest/Akzo Nobel Functional Chemicals) (Tetrasodium glutamate diacetate)
  • 0.20
  • Glycerin 99.7% USP Kosher (Coast Southwest)
  • 2.00
  • Olivatis 15 (Coast Southwest) (Olive oil glycereth-8 esters)
  • 4.50

Phase B

  • Olivatis 11 (Coast Southwest) (Polyglyceryl-3 olivate phosphate)
  • 2.00
  • Endimate 33V Coast Southwest)(Capryl/caprylic triglyceride)
  • 3.50
  • Moringa Seed Oil (Coast Southwest/Vivimed Laboratories) (Moringa oleifera seed oil)
  • 1.00
  • Olivatis 13 (Coast Southwest) (Polyglyceryl-3 cetearyl ether olivate)
  • 3.00
  • Cetyl Alcohol (Coast Southwest) (Cetyl alcohol)
  • 1.50
  • Endimulse 165V Flake (Coast Southwest) (Glyceryl stearate (and) PEG-100 stearate)
  • 1.50
  • Vivisept GC (Coast Southwest/Vivimed Laboratories) (Glyceryl caprylate (and) glyceryl undecylenate)
  • 1.00

Phase C

  • Hydrasoft SEA (Coast Southwest) (Water (and) algae extract (and) natto gum (and) phenoxyethanol (and) chlorophenesin (and) citric acid)
  • 2.00
  • Alguard PF (Coast Southwest/Frutarom) (Porphyridium polysaccharide)
  • 5.00

Phase D

  • BNPoly UV Crystal TR 22 (Coast Southwest) (Boron nitride (and) titanium dioxide (and) dimethicone (and) isododecane (and) ethylene/VA copolymer)
  • 0.25
  • Fiflow BTX (Coast Southwest) (Perfluorohexane (and) perfluoroperhydrophenanethrene (and) Perfluorodecalin (and) perfluorodimethylclyclohexane)
  • 10.00

Procedure

Phase A–Add phase A to main vessel, begin shear mixing, and heat to 80°C. Phase B–Add phase B to separate vessel under shear mixing and heat to 80°C. Once main vessel and separate vessel are at the desired temperature, add phase B to phase A slowly under continued shear mixing. Begin cool down. Phase C–Premix phase C in separate vessel. Once main vessel is below 40°C, add phase C to main vessel with continued shear mixing. Continue cool down. Phase D–When main vessel has reached room temperature, transfer to homogenizer and add phase D to main vessel. Homogenize until uniform. Transfer to final container.

Properties

pH—6.0-6.5; Viscosity—spindle 4.0 at 10.0 rpm = 3,500-6,000 cst.

More Information

Coast Southwest, Inc. 800-621-0500 Email: [email protected] Website: www.coastsouthwest.com